วงจร Zener ออสซิลเลเตอร์



These two circuits are interesting from an academic point of view. Their practical implementation is rather critical and it is not easy to get steady operation. Circuit (a) requires a "cooked" zener: connect it first to a constant current generator, then increase the current until the voltage across the zener starts to decrease. Reduce the supply current and wait a few minutes until it really warms up. The zener is now ready for the circuit: increase the voltage slowly until it oscillates (1KHz in the circuit shown). You may need to decrease the voltage once oscillation takes place. With suitable circuit components it will oscillate up to 20MHz. Circuit (b) will oscillate at a very low frequency, normally 2-5Hz, provided the voltage is increased very slowly, loading is critical and you may find that a slightly different lamp will work better. Higher voltage zeners work better than low voltage zeners and the circuits operate only with the specified types. The reasons for the oscillations are unknown, although, for circuit (b) it is felt that some kind of reversible thermal breakdown is at work.
 
 

วงจรไฟฟ้า หมายถึง ทางเดินของกระแสไฟฟ้าซึ่งไหลมาจากแหล่งกำเนิดผ่านตัวนำ และเครื่องใช้ไฟฟ้าหรือโหลด แล้วไหลกลับไปยัง แหล่งกำเนิดเดิม

วงจรไฟฟ้าประกอบด้วยส่วนที่สำคัญ 3 ส่วน คือ
   1. แหล่งกำเนิดไฟฟ้า หมายถึง แหล่งจ่ายแรงดันไฟฟ้าไปยังวงจรไฟฟ้า เช่นแบตเตอรี่
   2. ตัวนำไฟฟ้า หมายถึง สายไฟฟ้าหรือสื่อที่จะเป็นตัวนำให้กระแสไฟฟ้าไหลผ่านไปยังเครื่องใช้ไฟฟ้า ซึ่งต่อระหว่างแหล่งกำเนิดกับเครื่องใช้ไฟฟ้า
   3. เครื่องใช้ไฟฟ้า หมายถึง เครื่องใช้ที่สามารถเปลี่ยนพลังงานไฟฟ้าให้เป็นพลังงานรูปอื่น ซึ่งจะเรียกอีกอย่างหนึ่งว่า โหลด สวิตซ์ไฟฟ้านั้นเป็นส่วนหนึ่งของวงจรไฟฟ้า มีหน้าที่ในการควบคุมการทำงานให้มีความสะดวกและปลอดภัยมากยิ่งขึ้น ถ้าไม่มีสวิตซ์ไฟฟ้าก็จะไม่มีผลต่อการทำงานวงจรไฟฟ้าใดๆ เลย