วงจร 220V Mains Monitor



With this circuit you will be able to monitor the quality of the mains. There are 4 distinct sections, each supervising a parameter pertinent to the quality of the supply line. The noise section consists of a 50Hz filter and a speaker where you will hear the noise present on the line. The bicolor LED should be adjusted for the least light with the 5k pot and gives a visual indication of noise or asymmetry in the wave. The second section will detect any spike which is overimposed on the mains voltage: adjust the pot so that it will not trip if you just switch on the light, sensitivity is high enough to detect a switching operation from a close neighbor. The buzzer will beep for about 1sec anytime there is a spike. The actual voltage is detected with section 3: the yellow led will blink at a rate of 6 Hz but will visibly double to 12 Hz for a 10% increase or will come to a halt for a 10% decrease of the voltage. The last section will show the flutter or slow variations of the mains voltage. The circuit will work for a 220V mains: for 230V operation, change the 27V zener to 39V and for 60Hz operation change the 3.9k resistor to 3.3k and the 47k resistor to 39k. Operation at 110V will call for a major redesign of the component values and has not been attempted
 
 

วงจรไฟฟ้า หมายถึง ทางเดินของกระแสไฟฟ้าซึ่งไหลมาจากแหล่งกำเนิดผ่านตัวนำ และเครื่องใช้ไฟฟ้าหรือโหลด แล้วไหลกลับไปยัง แหล่งกำเนิดเดิม

วงจรไฟฟ้าประกอบด้วยส่วนที่สำคัญ 3 ส่วน คือ
   1. แหล่งกำเนิดไฟฟ้า หมายถึง แหล่งจ่ายแรงดันไฟฟ้าไปยังวงจรไฟฟ้า เช่นแบตเตอรี่
   2. ตัวนำไฟฟ้า หมายถึง สายไฟฟ้าหรือสื่อที่จะเป็นตัวนำให้กระแสไฟฟ้าไหลผ่านไปยังเครื่องใช้ไฟฟ้า ซึ่งต่อระหว่างแหล่งกำเนิดกับเครื่องใช้ไฟฟ้า
   3. เครื่องใช้ไฟฟ้า หมายถึง เครื่องใช้ที่สามารถเปลี่ยนพลังงานไฟฟ้าให้เป็นพลังงานรูปอื่น ซึ่งจะเรียกอีกอย่างหนึ่งว่า โหลด สวิตซ์ไฟฟ้านั้นเป็นส่วนหนึ่งของวงจรไฟฟ้า มีหน้าที่ในการควบคุมการทำงานให้มีความสะดวกและปลอดภัยมากยิ่งขึ้น ถ้าไม่มีสวิตซ์ไฟฟ้าก็จะไม่มีผลต่อการทำงานวงจรไฟฟ้าใดๆ เลย