DekGenius.com
[ Team LiB ] Previous Section Next Section

Recipe 1.12 Create a Combo Box That Allows a User to Select N/A

1.12.1 Problem

You'd like to be able to create a combo box that looks up items in a table and is limited to this list of items, but with the additional choice of <N/A>, which can be used to enter a null value for the field. You don't want your users to be able to enter any invalid entries, just <N/A> (or some other special code).

1.12.2 Solution

You can set the LimitToList property for the combo box to Yes to limit entries to those that your combo box provides and use a sorted union query to add an additional <N/A> row to the row source for the combo box. We suggest using <N/A> rather than simply N/A to force the entry to sort to the top of the combo box list. To make this work right, you'll need to make the combo box unbound and use a bit of VBA code to move values between the underlying table and the combo box.

To create a combo box with an <N/A> entry on a form of your own, follow these steps:

  1. Create an unbound combo box that draws its records from a table. In the sample database, we created a combo box called cboArtistID on the form frmAlbums. To duplicate the combo box in the sample database, create a combo box with the properties shown in Table 1-6.

    The other properties for this control don't matter. We purposely left RowSource blank; you will fill this in after you create the union query. The ColumnWidths entries of "0 in;2 in" will make the first column, which will hold the ArtistID, hidden from the user. Only the second column, with the ArtistName (or <N/A>), will show.

Table 1-6. Properties for the cboArtistID combo box

Property

Value

Name

cboArtistID

ControlSource

 

RowSourceType

Table/Query

RowSource

 

ColumnCount

2

ColumnHeads

No

ColumnWidths

0 in;2 in

BoundColumn

1

ListRows

8

ListWidth

2 in

LimitToList

Yes

  1. Create a new query that will supply the values for the combo box control. Click on Close when you are prompted to add a table. Switch to SQL view by selecting Query SQL Specific Union. For the frmAlbums sample form, enter:

    SELECT  ArtistID, ArtistName
    FROM tblArtists
    
    UNION 
    
    SELECT "<N/A>","<N/A>"
    FROM tblArtists
    ORDER BY ArtistName;
  2. Save the query and close it. In this example, we saved the query as qryArtists.

  3. Open the form again in design view, and select the name of the query you created in Steps 2 through 3 in the RowSource property of the combo box.

  4. Select [Event Procedure] in the combo box AfterUpdate property, click the "..." button, and enter the following code:

    Private Sub cboArtistID_AfterUpdate( )
        If cboArtistID = "<N/A>" Then
            ArtistID = Null
        Else
            ArtistID = cboArtistID
        End If
    End Sub
  5. Select [Event Procedure] in the form's OnCurrent property, click the "..." button, and enter the following code:

    Private Sub Form_Current( )
        If IsNull(ArtistID) Then
            cboArtistID = "<N/A>"
        Else
            cboArtistID = ArtistID
        End If
    End Sub
  6. Run the form. You should now be able to select <N/A> from the list of values for the combo box. Null values will be entered in the ArtistID field in the table for those items, and as you scroll through the form they will show up as <N/A>.

To see how this works using the sample database, open the frmAlbums form in the 01-12.MDB database. You can use this form to edit or add new albums to tblAlbums. Add a new album that has no single artist. For example, enter a record for Woodstock, which is a compilation of multiple artists. When you pull down the Artist combo box you will see, at the top of the list, the choice <N/A> (see Figure 1-32). Select this item from the list and a null value will be entered into the underlying ArtistID long integer field.

Figure 1-32. The Artist combo box with an <N/A> item
figs/acb2_0132.gif

1.12.3 Discussion

The key to this solution is using a union query and an unbound combo box. You use a union query—which was discussed in the Solution in Recipe 1.11—to splice together the data from two tables. This union query is different from the usual variety because it combines the values in one table with values that you are providing in the query. This is accomplished by the union query's second SELECT statement, shown here:

UNION 
SELECT "<N/A>","<N/A>"
FROM tblArtists

Notice that this SELECT statement selects two constants from a table. These constants aren't actually stored in the tblArtists table (or anywhere else, for that matter), but you need to refer to some existing table in the SELECT statement—we used tblArtists, since that table is already referenced in the query. This part of the query creates a single row that contains <N/A> in both the bound and displayed columns and combines it with the first half of the union query. Finally, the ORDER BY clause for the query tells Access to sort the entries by ArtistName, but because < comes before any letter in the alphabet, the <N/A> entry will sort to the top. If you run this query outside of the form, it will return a datasheet with a row made up of two constants and combined with the rows from tblArtists, as shown in Figure 1-33.

Figure 1-33. Datasheet returned by the union query
figs/acb2_0133.gif

It is easy to see why <N/A> is entered in the displayed column (the second column)—that's the value you want the user to see. But why also place it in the first column? Actually, any value would work in the first column, as long as it doesn't match one of the actual values that might show up in that column. We used the same <N/A> value for simplicity. This first column is used by the VBA code only for setting and reading the value selected by the user. The VBA code in the Current event of the form takes care of selecting the correct row in the combo box when a record becomes current, and the code in the AfterUpdate event of the combo box enters the appropriate value into the ArtistID field when a selection is made.

You may wonder why we didn't use a combo box bound to the ArtistID field in the form. You might think that we could have used our union query to add a row with a null value in the first column and <N/A> in the displayed column. Unfortunately, this simple solution just won't work. When a combo box is set to null or even to "" it will always show a blank, even if there is a null (or "") value in a row in its bound column. The <N/A> value would not show up for records where the ArtistID was null—instead, the combo box would just be blank. To work around this column, we needed to use an unbound combo box and VBA code.

The combination of using the Current event of the form and the AfterUpdate event of a control is a common pattern when programming Access forms. Both events are needed to keep the user interface of a form in sync with data as the user edits the data and scrolls through the form. This pattern is often used with bound controls too—not just with unbound controls, as demonstrated in this example.

With simple text boxes, you can use the Format property of the text box to control how nulls are displayed. For example, a text box bound to a date field could have this Format setting:

Short Date;;;"<not scheduled>"

This will automatically display the specified message for null dates. The four optional parts of the Format setting respectively control positive, negative, zero, and null values. But this technique won't work for a combo box.


1.12.4 See Also

To fill a combo box programmatically, see Recipe 7.5 in Chapter 7. To optimize your combo box performance, see Recipe 8.3 in Chapter 8.

    [ Team LiB ] Previous Section Next Section