DekGenius.com
[ Team LiB ] Previous Section Next Section

Recipe 12.5 Add an Item to the Startup Group

12.5.1 Problem

As part of your application, you would like to be able to allow users to add an application to the Startup menu so that your application will start up when Windows does. You just can't figure out how to put the information into the Startup group. Is there a way to communicate between Access and the Windows shell so you can do this?

12.5.2 Solution

This is a case where the old technology called DDE comes in handy. The Windows shell accepts commands using DDE that allow you to create and delete groups and items. You can also retrieve lists of existing groups and items within those groups. This solution explains most of the Windows shell's DDE interface.

To test out the DDE interface, load and run the form frmShell from 12-05.MDB. This form, shown in Figure 12-7, allows you to view groups and their items, create and delete groups and items, and display a particular group. It will decide whether to use the group/item or the folder/shortcut terminology after determining whether you are using the Windows 9x shell or the Windows NT/Windows 2000 Program Manager, respectively.

You'll find several references to Program Manager and PROGMAN throughout this solution, as well as the use of the group/item notation rather than folder/shortcut, but the effect is the same either way: you can create groups and items in the Program Manager or in the Windows shell, depending on your environment.


Figure 12-7. frmShell allows you to communicate with the Windows shell via DDE
figs/acb2_1207.gif

Once you select a group from the list on the left in Figure 12-7, the form will display the group's items in the list on the right. If you select the first item in the righthand list—the group itself—the form will display the information Windows stored about that group. Once you've selected a group in the righthand list box, you can click the Show button to have Windows display that group. The code attached to the Show button requests Windows to open the group window using style 3 (see Table 12-8 for a list of window styles). As described later, in the sidebar Switching Focus," Windows may grab the focus, depending on the previous state of the group window you've selected.

The shell DDE interface does not support long filenames, and attempts to enter long filenames will fail with an error. The example form displays long filenames using the 8.3 short version of the name—usually six characters, followed by a "~1" (or a higher digit).


Select an item in the group (any row except the first in the righthand list box), and the form will display all the information that Windows stores about that item. Figure 12-8 shows frmShell with an item selected.

Figure 12-8. frmShell with a group selected and its information displayed
figs/acb2_1208.gif

With either a group or an item selected, you can create or delete a group or an item. If you've selected a group, pressing the Delete button will instruct Windows to delete that group; if you've selected an item, Windows will delete that item. Regardless of what's selected, pressing the Create button will pop up a dialog asking whether you want to create a new item or a new group. Either choice will pop up the appropriate dialog requesting the necessary information.

The following sections describe how to use the sample forms in your own applications, and then explain most of the DDE interface to the Windows shell. Although more DDE options are available, the most useful tasks can be accomplished with the tools provided here.

12.5.2.1 Using the sample forms

To include the sample forms from 12-05.MDB in your own applications, follow these steps:

  1. Import the objects shown in Table 12-3 into your application.

Table 12-3. Objects to import from 12-05.MDB

Object

Name

Purpose

Form

frmNew

Choose new group or new item.

Form

frmNewGroup

Enter new group information.

Form

frmNewItem

Enter new item information.

Form

frmShell

Main form.

Module

basShell

Perform DDE conversations with Windows shell.

Module

basSortArray

Sort arrays (list of program groups).

Module

basToken

Pull apart strings (item and group information on frmShell).

  1. Load and run frmShell.

    As described previously, you can use the form to manipulate shell groups and items from your Access application. If you want to use only some parts of frmShell in your application instead of the whole thing, that's fine too. If you use the group list (lstGroups), you'll also need to include the function that fills it, FillGroups. If you want the item list (lstItems), you'll also need FillItems. In addition, place code in lstGroup's AfterUpdate event that requeries lstItems once you've made a selection in lstGroups. You'll end up with an event procedure like this:

    Private Sub lstGroups_AfterUpdate ( )
       Me.lstItems.Requery
    End Sub

    To use other bits and pieces of the functionality of frmShell, you'll need to investigate its form module.

12.5.2.2 Using DDE with the Windows shell

If your main interest is simply to use DDE to control the Windows shell, follow these steps:

  1. Import the module basShell from 12-05.MDB into your own application. This module is completely self-contained and includes a number of functions that will set up the DDE conversation, do the work or retrieve the information you need, and then terminate the conversation. Because we've hidden all the details of the DDE, you needn't worry about getting all the syntax and parameters correct.

  2. Depending on your needs, call one or more of the wrapper procedures described in Table 12-4. All of these functions are covered in detail in Recipe 12.4.3 (see Table 12-9).

Table 12-4. Procedures in basShell to aid in using DDE between Access and Windows shell

Procedure

Purpose

acbPMCreateGroup

Create a group, given a group name and a pathname for the group file.

acbPMCreateItem

Create a new item, given the group name, the item name, the command line, the default directory, and whether or not to run the application minimized.

acbPMDeleteGroup

Delete a group, given the name of the group to delete.

acbPMDeleteItem

Delete an item from a group, given the name of the group and the name of the item.

acbPMGetGroups

Fill a dynamic array with all the groups.

acbPMGetItems

Fill a dynamic array with all the items for a particular group.

acbPMShowGroup

Show a particular group, given the name of the group and the window mode to use.

acbPMShowMessages

Allow callers outside this module to show or hide messages. Pass in True to show messages, False to hide them (no DDE involved).

12.5.3 Discussion

The Windows shell supports two operations: you can either request information using the DDERequest function (Table 12-5 lists the DDERequest items) or execute actions using the DDEExecute subroutine (Table 12-6 lists the most useful subset of the shell's DDEExecute command-string interface). DDE conversations between Access and the shell involve three steps:

  1. Initiate the conversation.

  2. Perform the necessary tasks.

  3. Terminate the conversation.

12.5.3.1 Retrieving information from the Windows shell

Table 12-5 describes the two groups of information you can request from Windows. The sample form, frmShell, uses both to fill its two list boxes.

Table 12-5. DDERequest topics for the Windows shell

To retrieve

Program

Topic

Item

Returns

List of groups

PROGMAN, or Folders

PROGMAN, or AppProperties

PROGMAN

List of existing groups, separated with CR/LF pair

List of items in a group

PROGMAN, or Folders

PROGMAN, or AppProperties

<Group Name>

List of items in the specified group, separated with CR/LF pair

To retrieve a list of groups from Windows using the Access DDERequest function, you must first initiate a conversation with the PROGMAN program on the PROGMAN topic, requesting information on the PROGMAN item; even if you use the undocumented "Folders" program name and "AppProperties" topic, it still expects you to request information on the PROGMAN item. The DDERequest call returns a carriage-return/line-feed (CR/LF) delimited string of group names. It's up to your code to pull apart the list of groups and place them into whatever data structure is most convenient for you. To simplify this task, you can use the acbPMGetGroups function in basShell. It accepts, as a parameter, a dynamic array to fill in with the list of groups. This function performs the DDERequest for you and calls the private CopyToArray function to break apart the returned stream of groups and fill the array you've sent it. It returns the number of items in the array. Its source code is:

Public Function acbPMGetGroups(avarGroups( ) As Variant)

   ' Fill a dynamic array with all the Program Manager groups.

   Dim lngChannel As Long
   Dim strGroups As String
   Dim intCount As Integer

   On Error GoTo HandleErr
   ' Most replacement shells will start PROGMAN for you if you attempt
   ' to start up a DDE conversation with it. That is, you won't need
   ' to Shell( ) PROGMAN if you're using a replacement shell.
   lngChannel = DDEInitiate("PROGMAN", "PROGMAN")
   strGroups = DDERequest(lngChannel, "PROGMAN")
   intCount = CopyToArray(strGroups, avarGroups( ))

ExitHere:
   acbPMGetGroups = intCount
   On Error Resume Next
   DDETerminate lngChannel
   Err.Clear
   Exit Function
   
HandleErr:
   MsgBox Err.Number & ": " & Err.Description, , "acbGetProgmanItems"
   Resume ExitHere
End Function

To call this function from your own code, use code like this:

Dim avarGroups( ) as Variant
Dim intCount as Integer

intCount = acbPMGetGroups(avarGroups( ))
' If you want the list sorted, call acbSortArray, in basSortArray.
acbSortArray avarGroups( )

To retrieve a list of items within a selected group, use the acbPMGetItems function, which works almost exactly as acbPMGetGroups does. This time, however, pass in a group name along with the dynamic array to be filled in; the function uses the group name as the topic, instead of PROGMAN (see Table 12-5). It calls the CopyToArray function to move the items into the dynamic array. You generally won't sort the array, however, unless you store the first item; this first item returns information about the group window itself. The rest of the rows contain information about the individual items. To use acbPMGetItems, you might use code like this:

Dim avarGroups( ) as Variant
Dim avarItems( ) as Variant
Dim intCount as Integer

intCount = acbPMGetGroups(avarGroups( ))
intCount = acbPMGetItems(avarGroups(0), avarItems( ))
' List all the item information for the specified group.
For intI = 0 To intCount - 1
   Debug.Print avarItems(intI)
Next intI
12.5.3.2 Executing tasks

The Windows shell includes a command-string interface, which you can access via DDE, that allows you to execute tasks involving groups and items within those groups. Table 12-6 lists the functions addressed in this solution. Other commands are available (they're documented in the Windows SDK documentation), but they're not as useful for Access programmers.

Table 12-6. DDEExecute commands for the Windows shell

Function

Parameters

Comments

AddItem

See Table 12-7

Uses CreateGroup first to select the group.

CreateGroup

GroupName[, GroupPath]

Selects the group if it exists; otherwise, creates it.

DeleteGroup

GroupName
 

DeleteItem

ItemName 

Uses CreateGroup first to select the group.

ShowGroup

GroupName, ShowCommand

See Table 12-8 for ShowCommand values.

In each case, you use the Access DDEExecute procedure to communicate with the shell. You must construct a string containing the function name, parentheses, and any arguments for the function. For example, to create a group from within Access, you can use code like this:

Dim intChannel as Integer
intChannel = DDEInitiate("PROGMAN", "PROGMAN")
DDEExecute intChannel, "[CreateGroup(My Group, MYGROUP.GRP)]"

The command string must be surrounded by square bracket delimiters ([]). Luckily, the Windows shell is far more relaxed about the use of embedded quotes than almost any other DDE-enabled application. For example, WinFax Pro's implementation of DDE requires quotes embedded in command strings you send to it; the Windows shell accepts embedded quotes but doesn't require them.

Some functions, such as AddItem, allow quite a few parameters, almost all of which can be left blank (see Table 12-7). To use the AddItem command to add a new item, you must first select a group in which to add the item. To do this, use the CreateGroup command, which creates a group if necessary or selects it if it already exists. The only required AddItem parameter is the command line. Note that both X- and Y-coordinates are necessary if you choose to specify coordinates for the icon. For example, to create a new icon to run C:\EDIT\MYEDIT.EXE with the description My Editor minimized in the My New Group group, use code like this (you'd normally include error-handling code, too):

Dim intChan As Integer
intChan = DDEInitiate("PROGMAN", "PROGMAN")
' First select the group (or create it).
DDEExecute intChan, "[CreateGroup(My New Group)]"
' Use commas to delimit parameters (even missing ones).
DDEExecute intChan, "[AddItem(C:\EDIT\MYEDIT,My Editor,,,,,,1)]"

Table 12-7. Parameters for the AddItem function

Parameter

Required?

Used in sample?

Description

CmdLine

Yes

Yes

Command line to run the application. Must be at least the executable filename, but can also include parameters as necessary.

Name

No

Yes

Name that appears below the icon in the group.

IconPath

No

No

Name and path of the icon file to use. If an executable file is specified, use the first icon in that file. If left blank, use the first icon in the executable file specified in the CmdLine parameter.

IconIndex

No

No

Index of the icon in the specified IconPath file (or the specified executable). Otherwise, if missing, use the first icon specified.

Xpos

No

No

X-position of the icon within the group, as an integer. Both this and Ypos are required to set the specific position. If left blank, use the next available position.

Ypos

No

No

Y-position of the icon within the group, as an integer.

DefDir

No

Yes

Default (or working) directory for the application.

HotKey

No

No

Hot key for this application, stored as an integer.

fMinimize

No

Yes

Run Minimized (1 = True, 0 = False).

fSeparateMemSpace 

No

No

In Windows NT only, run the application in a separate memory space (applies to 16-bit applications only).

Switching Focus

Using the ShowGroup command sometimes moves the focus to the shell but usually does not. Whether the focus switches depends on the state you request for the program group and on its current state. Though you could make a matrix of options, comparing current states (minimized, normal, or maximized) against the new window state (1-8, as in Table 12-8), the rules are quite simple. If you change the state of a group that's currently minimized, the focus will switch to the shell. That means that if you choose actions 1, 3, or 4 for a group that is currently minimized, the shell will grab the focus. You can try this yourself, calling the acbPMShowGroup function and passing it the name of a group and a new window style.


Table 12-8. Window style command values for the ShowGroup function

Window style value

Action

1

Activate and display the group window. If it was minimized or maximized, restore it to its original position (normalized).

2

Activate the group window and display it as an icon.

3

Activate the group window and display it maximized.

4

Display the group window normalized and leave the current group selected.

5

Activate the group window and display it in its current placement.

6

Minimize the group window.

7

Minimize the group window and leave the current group selected.

8

Display the group window in its current placement and leave the current group selected.

12.5.3.3 Using the wrapper procedures

To make your DDE programming simpler, the module basShell includes wrapper procedures that handle all the details for you. (Table 12-4 provides a description of each of the wrapper procedures; Table 12-9 lists the parameters.) The module also provides functions that handle each of the commands described in Table 12-6. In some cases (AddItem, for example), the wrapper functions don't allow you to specify all the possible parameters for the command string. If you find these wrapper functions too limiting, you can modify them so they allow you to pass in whatever parameters you like.

All the wrapper procedures (except acbPMShowMessages) in Table 12-9 perform the same set of steps to communicate with the Windows shell. To simplify the code and centralize error handling, those steps have been pulled into a single private procedure in basShell, DDEExecutePM, which is shown in the following code example:

Private Function DDEExecutePM(strCommand As String) As Boolean
   
   ' DDEExecute with the passed-in command. If it succeeds,
   ' return True. If it fails, return False.

   ' At this point, this function handles error messages itself.
   ' You could move this out of here to a higher level, if you
   ' want, by setting the SHOW_MESSAGES constant to False.

   Dim lngChannel As Long

   On Error GoTo HandleErr

   lngChannel = DDEInitiate("PROGMAN", "PROGMAN")
   DDEExecute lngChannel, strCommand
   DDEExecutePM = True

ExitHere:
   On Error Resume Next
   DDETerminate lngChannel
   Err.Clear
   Exit Function

HandleErr:
   If Not mfHideMessages Then
      MsgBox Err.Number & ": " & Err.Description, , "DDEExecutePM"
   End If
   DDEExecutePM = False
   Resume ExitHere
End Function

Given a string to execute, this code initiates the DDE channel, uses DDEExecute to execute the command, and then terminates the connection. If all goes according to plan, the procedure returns a True value. If an error occurs, it displays a message box (unless you've used the acbPMShowMessages procedure to disable warning messages) and then returns False.

Table 12-9 lists the parameters for the wrapper procedures in basShell. Each of these procedures (except acbPMShowMessages) returns True if the function succeeded, or False if it failed. Unless you've called the acbPMShowMessages subroutine to disable messages, a message will appear before deleting a group or item or if any error occurs.

Table 12-9. Parameters for the wrapper procedures in basShell

Procedure

Parameter

Data type

Parameter description

acbPMCreateGroup

varName

Variant

Name of the new group.

 
varGroupPath 

Variant

Name of the group file (can be Null, in which case Windows uses a name of its own choosing).

acbPMCreateItem

varGroup 

Variant

Name of the group in which to create the new item.

 
varName 

Variant

Descriptive name for the new item; appears under the icon.

 
varCommandLine

Variant

Command line to execute when this icon is chosen. Cannot be Null.

 
varDirectory 

Variant

Default (working) directory when the application starts up.

 
varMinimized 

Variant

Logical value: run the app minimized?

acbPMDeleteGroup

varName 

Variant

Group to delete.

acbPMDeleteItem

varGroup 

Variant

Group from which to delete the item.

 
varName

Variant

Name of the item to delete.

acbPMShowGroup

varName

Variant

Name of the group to show.

 
intMode 

Integer

Window mode, as listed in Table 12-8.

acbPMShowMessages

fShow 

Integer

Logical value: display messages during DDE wrapper functions? If True, functions use message box if errors occur and when deleting items. This subroutine sets a module global variable, so you need to call it only once per session.

For example, to use the wrapper functions to add an icon to the My Group group that will run C:\EDIT\MYEDIT.EXE minimized with the description My Editor (as in the example that called AddItem directly), you could use code like this:

Dim fSuccess As Boolean

' Disable error messages.
acbPMShowMessages False
fSuccess = acbPMCreateItem("My Group", "My Editor", _
 "C:\EDIT\MYEDIT.EXE", Null, True)
If Not fSuccess Then MsgBox "Unable to create new item!"

This example also calls acbPMShowMessages to disable error messages from within acbCreateItem, so the code fragment itself can handle them.

For examples of each of the wrapper functions, check out the code in frmShell's module.

12.5.4 Comments

Though this solution covers a great deal more than the original question required, all the information here will be useful to Access programmers working with the DDE interface to the Windows shell.

The sample form, frmShell, is not only a good example of using DDE to converse with Windows, it's also a useful tool on its own. Because it allows you to see what's in each group without having to open and close each group's window, it's a quick and easy way to clean out your groups. Of course, some extra work would be required for it to be a really useful tool, but it's a good start.

In 16-bit applications, DDEInitiate returns a short integer (16-bit) handle. In Access 95 and later (and other 32-bit applications), this function returns a long integer (32-bit) handle. If you have existing code that uses DDE, you'll want to convert the variables containing the return values into long integers.

The Windows shell has an undocumented DDE application topic pair that is not supported by the original Program Manager or any of the major third-party shell substitutes: Folders AppProperties. This syntax seems to be just an alias for the regularly documented DDE interface, because the item name syntax and all the operations are identical in both cases.

This undocumented syntax can be of some benefit. If you are going to add the functionality to interact with the shell, you can use code like the following to determine if your user is running the Windows 9x shell:

Public Function acbNewShell ( ) as Boolean
   Dim lngChannel as Long
   On Error Resume Next
   lngChannel = DDEInitiate("Folders","AppProperties")
   acbNewShell = (lngChannel <> 0)
   DDETerminate lngChannel
End Function

You'll notice that the example uses this function (as well as a public flag) to decide whether to call the various shell objects "groups" and "items" (as in the Windows NT Program Manager) or "folders" and "shortcuts" (as in the Windows 9x shell).

To shield you from the details of the DDE conversation and to isolate the DDE code in one routine, each of the command-string replacement functions calls the DDEExecutePM function. This makes the code neat and easy to understand, but it does have a potential disadvantage: calling DDEInitiate and DDETerminate every time you call a wrapper function adds substantial time and overhead to your application. If you make many calls to Window via DDE, you'll want to reconsider this design. For most applications, though, this shouldn't be a problem.

    [ Team LiB ] Previous Section Next Section