You want to set the router to automatically reload at a specified time.
You can set the router to reload after waiting a particular length of time with the reload in command:
Router1#reload in 20
Reload scheduled for 11:33:53 EST Sat Feb 1 2003 (in 20 minutes)
Proceed with reload? [confirm] <enter>
Router1#
The reload at command lets you specify a particular time and date when you want the router to reload:
Router1#reload at 14:00 Feb 2
Reload scheduled for 14:00:00 EST Sun Feb 2 2003 (in 26 hours and 44 minutes)
Proceed with reload? [confirm] <enter>
Router1#
If you set the router to reload at a specific time and date, then we highly recommend using an accurate time source to ensure that the router reloads when you think it will. For more information on time and time sources, see Chapter 14.
Usually, when you reload a router you want it to do so immediately. However, it can also be quite useful to specify a particular time to reload. For instance, reloading is the only way to fix badly fragmented memory on a router. But you almost certainly don't want to reload during production hours. This feature allows you to instruct the router to reload in the middle of the night or any other safe, low-traffic time.
Another excellent reason for using this delayed reload feature is to avoid locking yourself out of a router while making possibly dangerous configuration changes. There are many types of configurations changes—such as modifying access lists or routing configurations—that can isolate a router and prevent you from getting back in to fix the problem. But before you make the changes, you can instruct the router to reload itself in 15 minutes. If you lock yourself out of the router, you won't be able to save the running configuration to NVRAM. So when the router reloads, it comes up with the previous configuration. The bad configuration change is miraculously undone.
If it turns out that the new configuration is good, you can simply save it to NVRAM and cancel the reload. We will show how to cancel a scheduled reload in a moment.
The reload in command also allows you to specify a reason for the reload:
Router1#reload in 1:20 IOS Upgrade
Reload scheduled for 12:37:45 EST Sat Feb 1 2003 (in 1 hour and 20 minutes)
Reload reason: IOS Upgrade
Proceed with reload? [confirm] <enter>
Router1#
The command interprets any text that you enter after the reload time as the reason for reloading. Starting in IOS Version 12.2, the router records a log message whenever you issue the reload command. Included in this message are the time that the reload was requested, the reload time, the username of the person who requested it, and the reload reason:
Feb 1 11:17:47: %SYS-5-SCHEDULED_RELOAD: Reload requested for 12:37:45 EST Sat Feb 1 2003 at 11:17:45 EST Sat Feb 1 2003 by ijbrown on vty0 (172.25.1.1). Reload Reason: IOS Upgrade.
You can also include a reason with the reload at command:
Router1#reload at 23:20 Feb 15 IOS Upgrade
Reload scheduled for 23:20:00 EST Sat Feb 15 2003 (in 124 hours and 48 minutes)
Reload reason: IOS Upgrade
Proceed with reload? [confirm] <enter>
Router1#
The show reload command displays information on any impending reloads:
Router1#show reload Reload scheduled for 12:37:45 EST Sat Feb 1 2003 (in 1 hour and 19 minutes) by ijbrown on vty0 (172.25.1.1) Reload reason: IOS Upgrade Router1#
You can cancel a scheduled reload with the reload cancel command:
Router1#reload cancel Router1# *** *** --- SHUTDOWN ABORTED --- ***
When you cancel a reload like this, the router sends a system broadcast message notifying any active users that the reload has been cancelled. Starting with IOS Version 12.2, the router will also create a logging message indicating that someone has cancelled a scheduled reload:
Feb 1 11:19:10: %SYS-5-SCHEDULED_RELOAD_CANCELLED: Scheduled reload cancelled at 11:19:10 EST Sat Feb 1 2003 Router1#
If you have scheduled a reload, the router send periodic shutdown notices to all active users. By default, the router sends these messages 1 hour, 30 minutes, 5 minutes, and 1 minute before reload. You can cancel the reload at any time, up until the router actually shuts itself down.
The shutdown messages look like this:
Router1# *** *** --- SHUTDOWN in 1:00:00 --- *** *** *** --- SHUTDOWN in 0:30:00 --- *** *** *** --- SHUTDOWN in 0:05:00 --- *** *** *** --- SHUTDOWN in 0:01:00 --- *** Connection closed by foreign host.
 |
|
|
| Top |