Recipe 21.10 Debugging NAT

21.10.1 Problem

You want to debug a NAT problem.

21.10.2 Solution

Cisco routers include a simple but useful debug facility for NAT. The basic form of the command is debug ip nat:

Router#debug ip nat

You can also add the detailed keyword to this command to get more information on each NAT event:

Router#debug ip nat detailed

It is often useful to use an access list with the debug command. You can do this by simply specifying the number of the access list. This will allow you to look only at NAT events for particular IP addresses that are permitted by the access list:

Router#debug ip nat 15

You can also combine an access list with the detailed keyword for more focused debugging:

Router#debug ip nat 15 detailed

21.10.3 Discussion

The following shows some typical log entries:

Router#terminal monitor
Router#debug ip nat
Sep  8 19:51:08.396 EDT: NAT: s=192.168.3.1->192.168.19.1, d=192.168.3.2 [0]
Sep  8 19:51:11.560 EDT: NAT*: s=192.168.1.10->192.168.19.55, d=192.168.3.2 [4909]
Sep  8 19:51:11.568 EDT: NAT*: s=192.168.3.2, d=192.168.19.55->192.168.1.10 [4909]
Sep  8 19:51:11.572 EDT: NAT: s=192.168.3.2, d=192.168.19.55->192.168.1.10 [4909]
Sep  8 19:51:12.552 EDT: NAT*: s=192.168.1.10->192.168.19.55, d=192.168.3.2 [4911]
Sep  8 19:51:12.564 EDT: NAT*: s=192.168.3.2, d=192.168.19.55->192.168.1.10 [4911]

This particular trace follows a simple series of ping packets. The interior device 192.168.1.10 sends ICMP ping packets to the external destination 192.168.3.2. The router rewrites the internal address as 192.168.19.55 and forwards the packet to the external destination.

You can also see the ping responses coming back from the destination device. The router rewrites the internal address back to its true value and forwards the packet appropriately.